Phase-Adaptive Power Module • Provides dimming control for 1 zone of a full 16 A lighting load. • May be used to dim incandescent, halogen, electronic low-voltage, magnetic low-voltage, neon / cold cathode. • Phase-adaptive technology automatically selects leadingedge or trailing-edge dimming for low-voltage transformers. • Up to 3 power modules may be controlled by a single dimmer (C5-BMJ- will control only 1 module). • Use PHPM-WBX- models for 3-wire fluorescent dimmer input and PHPM-PA- models for 2-wire input. • PHPM-WBX- models can be used in conjunction with BCI-0-10 for 0 – 10 V dimming applications. For more information, see Application Note #516 (Lutron P/N 048516) at www.lutron.com • Models available for control voltage of 120 V~ only or 220 – 277 V~. • Models available for load voltage of 120 V~ only or 120 – 277 V~. • Compatible with 220 / 240 V~, non-CE systems. Contact Lutron for specific system applications. • Not for use with non-dim loads. Works with 120 V~ or 220 – 277 V~ versions of: • Lutron in-wall neutral wire dimmers; see approved list in the Dimmers and Switches Specification Guide (Lutron P/N 3671746) at www.lutron.com (see Lighting Load Interfaces section) • GRAFIK Eye QS control units * • LP, LCP, and GP dimming panels ** • HomeWorks QS remote power panels ** • HomeWorks QS in-line dimmer • HomeWorks QS DIN-rail power modules • EcoSystem interface C5-BMJ-XXX †• Energi Savr Node PRO LED+ phase-adaptive fixture controller • RadioRA 2 neutral wire dimmers; see approved list in the specification submittal (Lutron P/N 369225) at www.lutron.com • HomeWorks QS neutral wire dimmers; see approved list in the specification submittal (Lutron P/N 369305) at www.lutron.com • Caséta Wireless neutral wire dimmers; see approved list in the specification submittal (Lutron P/N 369987) at www.lutron.com • Vive PowPak phase select dimming modules; see specification submittal (Lutron P/N 3691150) at www.lutron.com * For PHPM-PA- models, set load type to “